1.Brief introduction and Technical Specification

Frotec Membrane ULP (Ultra Low Pressure) series are the ultra low-pressure aromatic composite membrane elements, applicable to desalination of surface water and underground water. It can work under ultra low pressure to reach as high permeate flow and salt rejection as regualr low-pressure composite membrane, and achieves a salt rejection rate of up to 99.5%, which can decrease the investment costs for such relevant facilities as pump, piping, and container etc. and operating cost for the RO system, thus increasing the economic efficiency.

Working under the conditions of ultra low operating pressure, ULP membrane series can achieve as high permeated flow and rejection rate as regular low-pressure membranes can, it rus under approximately two thirds pressure of that regular low pressure compound membranes, and can achieve a rejection rate of as high as 98%.

Sea Water Treatment desalination filter Reverse Osmosis Membrane 2540

Model 2540

Perfor-mance Stable Desalination % 98
Min. Desalination % 97
Mean Permeable Flow GDP (L/d) 780 (2800)
Active Film Area ft2(m2) 28 (2.6)
Test Conditions Pressure 100psi
Water Temp. 25
Concentration(NaCl) 2000ppm
Water PH 6.5 to 7.5
Recovery Rate % 15

Operating Conditions

Max. Operating Pressure 600psi (4.2Mpa)
Max. Feed Water Temp. 45?
Max. Feed Water Silt Density Index (SDI) 5
Feed Water Chlorine Tolerance < 0.1ppm
Feed Water PH Range, Continuous Operation 3 to 10
Feed Water PH Range, Short-Term Cleaning 2 to 12
Max. Pressure Drop of Single Membrane 15psi (0.1Mpa)

Manufacturer warranty ONLY