Features
Formulated specifically to prevent microbiological growth within membrane elements and systems during storage.
Eliminates the need for formaldehyde, sodium metabisulfite and other chemicals that are either hazardous or unstable.
Non-toxic and environmentally friendly.
Powder formulation for ease of transportation and storage.
NSF/ANSI 60
Application
FOR On-line Storage
1. Clean the membrane prior to storage.
2. Disconect system feed line , turn system on and let it drain for 30 seconds
3. Place feed line and discharge line in container fill with clean DECHLORINATED FRESH water
4. Mix at a ratio of one pound (450gm) MSA for every 10 gallons (40Ltrs) of water or permeate water. for 2.5” Membranes for 4” Membranes 15 Gal (60Ltrs)
5. With regulator vales completely open, Recirculate storage solution at low pressure (<50 psi) through the membranes for a minimum of 10 minutes.
6. After re-circulation, shut the system down. Ensure storage solution does not drain out of membranes.
After storage,
1. Upon srartup after storage, open valves for operation, Start the system up and run for min 15 minutes, with no applied pressure.
2. When RO unit is first restarted , product water should be diverted to drain for Min 15 Min