Electrostatic Grease 35 ml Contact Grease Syringe for Batteries or Heavy Current Terminal
AC systems or DC systems.
Directions for Use
Before final treatment with lubricants, contact surfaces should be clean and dry.
503-335 can be applied by one of the following methods
(although this list is not exhaustive): Manually
syringe: Semi-automated using syringe dispensing.
In production processes, contact lubricant should be applied to the contact
components as soon as possible after manufacture or plating to protect
against handling contamination and tarnishing. 503-335 can be used on all
types of electrical contacts and with most types of thermoplastics.
A small area should be tested first to ensure compatibility.
503-335 is a non-melting product that will not migrate from vertical surfaces
and will provide greater environmental protection than the oil.
TECHNICAL DATA SHEET
Contact Treatment Grease
503-335 is a grease designed for use on electrical contacts to significantly
increase contact performance and lifetime.
Improves contact performance by increasing effective contact area
Suitable for a range of plastics and rubbers (testing advised) Inhibited against oxidation and copper corrosion
Excellent penetration and cooling properties; prevents arcing, thus reduces contact wear
Approvals RoHS-2 Compliant (2011/65/EU Yes
Density (g/ml) 1.10
Temperature Range (°C) -30 to +125
Evaporation Weight Loss (% 7 days @ 100°C) 3.7
Copper Strip Corrosion (IP154 / ISO 2160) =1b Drop Point (IP32 / ISO 2176 (°C)) 250
Cone Penetration Worked (ASTM D217, 60 strokes @ 20°C) – 320 Cone Penetration Un-worked (ASTM D 217 @ 20°C) 310
Consistency (NLGI) 1
Oil Bleed / Separation (IP121) 6%
Plastic Compatibility – ABS Test
Plastic Compatibility – PC Test
Base Oil Poly Alkylene Glycol
Water Content (%) 0.6
UV Trace No